Safety Solutions

Safety Floors

R‑rated safety flooring with enhanced traction, particles and welded seams for kitchens, ramps & wet areas. B2B supply & installation with specs & samples.

R10–R12
Slip rating
2.0–2.5 mm
Thickness
10+ years
Lifespan
Safety Floors
R10–R12Bfl‑s1Welded Seams
Safety Floors
Kitchens·Healthcare·Food Processing

Where Safety Floors Are Essential

Safety Floors are slip‑resistant resilient surfaces engineered for wet, greasy or contaminant‑prone zones. They combine textured surfaces with embedded aggregates/particles to maintain traction under challenging conditions. Typical areas: commercial kitchens, ramps, service corridors, wet entries, food prep, back‑of‑house, locker rooms and accessible bathrooms (system‑dependent).

Commercial kitchens

High grease and water exposure — target R11–R12 with heat/grease‑resistant adhesives.

Wet entries & ramps

Seasonal water ingress — pair R10–R11 safety floors with matting strategy at doors.

Healthcare & assisted living

Accessible bathrooms and service kitchens benefit from slip control and coved wash‑down detailing.

Food prep & back‑of‑house

Welded seams and coved upstands create hygienic wash‑down envelopes for daily cleaning.

Locker & changing rooms

Barefoot wet traction with particle‑enhanced surfaces and non‑abrasive textures.

B2B Supply & Installation

Supply to distributors, contractors, developers, architects and facility owners with specs and samples.

Technical & Compliance

Always confirm the exact R‑rating and test method for your jurisdiction (datasheet / DoP / installation manual).

  • Slip classification

    R10–R12 (ramp test); wet pendulum (PTV) ratings per line.

  • Surface

    Textured with embedded particles/aggregates for wet and greasy traction.

  • Format

    Rolls (sheet) primarily; some tile options exist for modular zones.

  • Seams & hygiene

    Hot‑welded seams; coved skirtings/upstands for wash‑down.

  • Thickness

    2.0–2.5 mm common (verify per SKU).

  • Fire performance

    Typically Bfl‑s1 (verify DoP/test).

  • Chemical/grease

    Designed for grease and cleaner exposure — see datasheet.

  • Indoor air

    Low VOC; certificates on request.

Safety Floors vs Standard Vinyl vs Tiles

Rule of thumb: use safety floors wherever wet, greasy or contaminant‑prone conditions are expected; smooth vinyl for dry commercial zones; tiles only where a mineral/tile spec is required.

Criterion

Safety Floors

Standard Vinyl (Smooth)

Ceramic/Porcelain Tiles

Design & Detailing Notes

  • Coving/upstands

    Form coved skirtings and upstands to create wash‑down envelopes; use preformed corners.

  • Drain & falls

    Coordinate with drain types and ensure falls to waste; place seams away from splash zones.

  • Transitions

    Plan threshold trims to smooth/safe floors (vinyl/LVT/linoleum).

  • Cleaning

    Specify compatible detergents/degreasers; avoid polish that could reduce slip.

  • Colour strategy

    Use visual contrast for hazard edges and wayfinding; matte/low‑glare finishes reduce reflections.

Sector Guidance

Different operating environments demand different R‑ratings, adhesives and detail packages. Here is how to specify safety floors by sector — so your project meets code the first time.

01

Commercial Kitchens & Food Prep

Aim for R11–R12 ranges; ensure heat/grease‑resistant adhesives and steam‑clean compatible welding. Coved upstands and drain coordination are mandatory in wash‑down zones.

02

Healthcare & Assisted Living

Accessible bathrooms and service kitchens benefit from slip control and coved wash‑down detailing. Use matte, low‑glare finishes to reduce reflections and support wayfinding.

03

Education & Public Facilities

Wet entries, ramps and canteen back‑of‑house — use safety floors; coordinate with matting strategy at doors to extend service life and limit grit migration.

Subfloor & Installation

Safety textures only perform when the substrate, adhesive and welded seams are executed correctly. Here are the specs your installer must control.

  • Subfloor prep

    Moisture control and smoothing; safety textures telegraph irregularities more than smooth vinyl — levelling must meet manufacturer spec.

  • Adhesives

    Use approved high‑grab/grease‑resistant adhesives; respect open times, temperature and relative humidity conditions.

  • Seam welding

    Hot‑weld using compatible rods; test seams in kitchens and wet zones before handover.

  • QA checks

    Slip test acceptance where required; verify R‑rating and pendulum (PTV) performance on handover.

Logistics & B2B Supply

Materials supply with optional [professional installation](/flooring-installation/). Or use your own contractor/installer.

Order sizes:

Project rolls and accessories (welding rods, coving, corners, drains).

Lead times:

Stock vs made‑to‑order colours.

Docs:

Datasheets, DoP/DoC, slip/fire tests, EPD on request.

Samples:

Texture chips/boards.

Support:

Spec text, detail drawings, maintenance guides.

FAQ

Here you'll find answers to the most common questions about safety floors. If you don't see what you need, contact our team for project‑specific guidance.

01

Which R‑rating should a commercial kitchen target?

+

Typically R11–R12; confirm with local code and your risk assessment.

02

Can safety floors be used in showers?

+

Yes — choose wetroom‑approved safety floors with welded seams, coved upstands and compatible drains.

03

Do textured surfaces increase cleaning effort?

+

Use approved degreasers and mechanical scrubbers; textures are designed for cleanability when maintained correctly.

04

Are there particle‑free slip options?

+

Some lines use micro‑texture without visible particles; verify test data for wet performance.

05

Do you install?

+

We focus on materials supply, but we also offer professional flooring installation. Alternatively, use your own appointed contractor.

Ready to specify Safety Floors?

  • Request Specs & Commercial Offer (R‑rating, thickness, colour, area m², drains/coving, timeline).
  • Order Samples (texture set, colour shortlist).
Ready to specify Safety Floors?

Products in this category